Of course, network simulator 3 is considered as the finest support for the 5G network. Through this article our research professionals have enlisted the significance of ns3 in 5G network.
Ns3 Code for 5G
As the first process, we have to create and store the ns3 simulation code for the 5G in the scratch folder and the code includes some sample codes and they are enlisted in the following.
- 5G node configurations based on MmWave
Ptr mmWaveObj = CreateObject ();
mmWaveObj->Initialize();
NetDeviceContainer enbNetDev = mmWaveObj->InstallEnbDevice (SwitchNodes);
NetDeviceContainer ueNetDev = mmWaveObj->InstallUeDevice (UserNodes);
mmWaveObj->AttachToClosestEnb (ueNetDev, enbNetDev);
mmWaveObj->EnableTraces();
- Include header file
#include "ns3/internet-module.h"
#include "ns3/ipv4-static-routing-helper.h"
#include "ns3/ipv4-list-routing-helper.h"
#include "ns3/yans-wifi-phy.h"
#include "ns3/netanim-module.h"
#include
#include "ns3/flow-monitor-module.h"
#include
#include "ns3/ipv6-static-routing-helper.h"
#include "ns3/ipv6-routing-table-entry.h"
#include "ns3/mmwave-helper.h"
#include "ns3/mpls-module.h"
#include "ns3/openflow-module.h"
#include "ns3/te-server.h"
#include "ns3/applications-module.h"
Configure Ns3 5G Code
Next, we have to configure the ns3 code through the implementation of the below mentioned commands.
cd /home/research/ns-allinone-3.26/ns-3.26
sudo ./waf configure
Execute 5G Code in Ns3
The following commands have to be executed to run the 5G code in ns3. Additionally, we have demonstrated the results that are acquired through this execution process.
cd /home/research/ns-allinone-3.26/ns-3.26
sudo ./waf --run NS3_5G_Main --vis
To this end, we hopefully convey that you are capable to implement the network simulator 3 in 5G. In addition, you can ping us to clarify your issues.